Toll Free: 1-800-783-1553

Ohm Walsh 100 S-3

Production Period
Nationally Advertised Price
$1995 per pair
Amplifiers Recommended
Impedance (typical)
Frequency Response
32-20,000 Hz (+/-3dB)
Sensitivity @2.8 Volts
Recommended Room Sizes
1300-3000 cu ft
100.2000 upgrade instructions
Download 73 kB
Purchase OptionsPriceOrder
Upgrade to 2000 / pair

The Walsh 100 S-3 can be upgraded to use the current Walsh 2000 driver which allows for the bass to be extended and the treble to have wider dispersion.

$1,400 2 4
(1) With the return of the original part for recycling within 60 days.
(2) With the return of the original part for recycling before the shipment of the new part.
(3) Recycled repaired and tested.
(4) Per pair.
(5) Special shipping rate applies.

The Walsh 100-S3 was a medium sized straight-sided tower speaker with all equal width sidewalls and sharp 90 degree corners. It replaced the 100 Mk-2 and was replaced by the current Walsh 2000.

The driver can be upgraded to the new Walsh 2000 which allows for the bass to be extended down and the treble to have wider dispersion. All necessary parts can be installed with a screwdriver, hammer and hot-melt gun. The process takes about 30 minutes. The upgrade comes with a 3 Year Limited Parts & Labor Warranty, assuring you of years of listening pleasure.

Harold T. says, "I just wanted to let you know the speaker upgrade installation went perfectly without any problems.  The 100 Mk-2 cabinets still look great with the Walsh 2000 drivers installed.

"Their sound has taken my system to a new higher level on every recording I have listened to thus far. I have spent hours just listening with amazement. The increase in detail, expansion of soundstage, and increased stereo imaging is truly hard to believe. Many recordings, that I've had for years, I feel as though I'm hearing what the artist intended for the first time.  It's almost like I have been looking through a dirty window for years and when cleaned, the colors are brighter and sharper than I ever could have imagined."

Note: Most Ohm upgrades require no specialized knowledge and are easily completed completed by any person. It takes less time to install your own upgrade than it does to package and return ship your speakers to the factory, therefore, we recommend you save time and money by doing this yourself. We ship the upgrade to your door with clear, easy instructions. If for any reason you prefer to have the factory complete your upgrade installation, we will be happy to do this for free, however, you will be responsible for shipping and handling costs each way.

Ohm allows up to $1995 for the return of a complete undamaged pair of Walsh 300 MK-2's toward 25% of the purchase price of new Ohm speakers.

back to top