Ohm Walsh 100 MK-2

    The Walsh 100 was the smallest of the straight sided tower Walsh speakers that replaced the truncated pyramid cabinets of the earlier Walsh speakers. The Walsh 100 Mk-2 had real wood veneer cabinets with round corners. They were made in matched mirror image pairs. There was an Ohm logo near one corner and a ”100” label next to it on the next side. When set up for peak performance, the Ohm logo was on the front of the left speaker and the ”100” on the front of the right speaker.

    Purchase OptionsPriceOrder
    Upgrade to 2000 / pair

    The Walsh 100 Mk-2 can be upgraded to use the current Walsh 2000 driver which allows for the bass to be extended and the treble to have wider dispersion.

    $1,900 2 4
    (1) With the return of the original part for recycling within 60 days.
    (2) With the return of the original part for recycling before the shipment of the new part.
    (3) Recycled repaired and tested.
    (4) Per pair.
    (5) Special shipping rate applies.
    Ohm Walsh 100 MK-2 Specifications
    Production Period
    late 1990s - early 2000s
    Nationally Advertised Price
    $1400 per pair
    Dimensions
    9.5x13.5x39
    Amplifiers Recommended
    40-200W
    Impedance (typical)
    Frequency Response
    32-20,000 Hz (+/-3dB)
    Sensitivity @2.8 Volts
    88
    Recommended Room Sizes
    1300-3000 cubic feet
    100.2000 upgrade instructions
    Download 73 kB
    • The Walsh 100 was the smallest of the straight sided tower Walsh speakers that replaced the truncated pyramid cabinets of the earlier Walsh speakers. The Walsh 100 Mk-2 had real wood veneer cabinets with round corners. They were made in matched mirror image pairs. There was an Ohm logo near one corner and a ”100” label next to it on the next side. When set up for peak performance, the Ohm logo was on the front of the left speaker and the ”100” on the front of the right speaker.

    • The driver can be upgraded to the Walsh 100-S3 which allows for the bass to be extended down and the treble to have wider dispersion. All necessary parts can be installed with a screwdriver, hammer and hot-melt gun. The process takes about 30 minutes. The upgrade comes with a 3 Year Limited Parts & Labor Warranty, assuring you of years of listening pleasure.

      Harold T. says, "I just wanted to let you know the speaker upgrade installation went perfectly without any problems.  The 100 Mk-2 cabinets still look great with the Walsh 2000 drivers installed.

      "Their sound has taken my system to a new higher level on every recording I have listened to thus far. I have spent hours just listening with amazement. The increase in detail, expansion of soundstage, and increased stereo imaging is truly hard to believe. Many recordings, that I've had for years, I feel as though I'm hearing what the artist intended for the first time.  It's almost like I have been looking through a dirty window for years and when cleaned, the colors are brighter and sharper than I ever could have imagined."

      Note: Most Ohm upgrades require no specialized knowledge and are easily completed completed by any person. It takes less time to install your own upgrade than it does to package and return ship your speakers to the factory, therefore, we recommend you save time and money by doing this yourself. We ship the upgrade to your door with clear, easy instructions. If for any reason you prefer to have the factory complete your upgrade installation, we will be happy to do this for free, however, you will be responsible for shipping and handling costs each way.

    • Ohm allows up to $1400 for the return of a complete undamaged pair of Ohm 100 MK-2's toward 25% of the purchase price of new Ohm speakers.

    Contact Us

    Ohm Acoustics Corp.
    28 Tiffany Place, Unit 1L
    Brooklyn, NY 11231 USA
    Toll free: 800-783-1553
    Phone: 718-422-1111
    Service: 718-422-1111
    Contact Us By Email

    A Brand You Can Trust

    Ohm Acoustics Corp. BBB Business Review

    Follow us