Ohm Walsh 300 MK-2

The Walsh 300 was the largest of the straight sided tower Walsh speakers that replaced the truncated pyramid cabinets of the earlier Walsh speakers.

The Walsh 300 Mk-2 used real wood veneer cabinets with rounded corners. They were made in matched mirror image pairs. There was an Ohm logo near one corner and a ”300” label next to it on the next side. When set up for peak performance, the Ohm logo was on the front of the left speaker and the ”300” on the front of the right speaker. This system was designed for smaller rooms.

Purchase OptionsPriceOrder
Upgrade to 4000 / pair

The Walsh 300 Mk-2 can be upgraded to use the current Walsh 4000 driver which allows for the bass to be extended and the treble to have wider dispersion.

$3,800 2 4
Upgrade to 5000 / pair

The Walsh 300 Mk-2 can be upgraded to use the current Walsh 5000 driver which allows for the bass to be extended and the treble to have wider dispersion. The Walsh 5000 uses the same basic driver as the 4000 but features special adjustments to suit your room layout and taste, making it the most versatile driver we make.

$4,500 2 4
(1) With the return of the original part for recycling within 60 days.
(2) With the return of the original part for recycling before the shipment of the new part.
(3) Recycled repaired and tested.
(4) Per pair.
(5) Special shipping rate applies.
Ohm Walsh 300 MK-2 Specifications
Production Period
1998-2003
Nationally Advertised Price
$4000 per pair
Dimensions
13x17x43
Amplifiers Recommended
100-200W
Impedance (typical)
Frequency Response
22-20,000 +/- 2.5 dB Hz (+/-3dB)
Sensitivity @2.8 Volts
89 dB at 2.7v
Recommended Room Sizes
4500-8500 cu ft
300.4000 upgrade instructions
Download 78 kB
300.5000 upgrade instructions
Download 89 kB
  • The Walsh 300 was the largest of the straight sided tower Walsh speakers that replaced the truncated pyramid cabinets of the earlier Walsh speakers.

    The Walsh 300 Mk-2 used real wood veneer cabinets with rounded corners. They were made in matched mirror image pairs. There was an Ohm logo near one corner and a ”300” label next to it on the next side. When set up for peak performance, the Ohm logo was on the front of the left speaker and the ”300” on the front of the right speaker. This system was designed for smaller rooms.

  • The driver can be upgraded to the new Walsh 4000 or Walsh 5000 which allows for the bass to be extended down and the treble to have wider dispersion. All necessary parts can be installed with a screwdriver, hammer and hot-melt gun. The process takes about 30 minutes. The upgrade comes with a 3 Year Limited Parts & Labor Warranty, assuring you of years of listening pleasure.

     

    Note: Most Ohm upgrades require no specialized knowledge and are easily completed completed by any person. It takes less time to install your own upgrade than it does to package and return ship your speakers to the factory, therefore, we recommend you save time and money by doing this yourself. We ship the upgrade to your door with clear, easy instructions. If for any reason you prefer to have the factory complete your upgrade installation, we will be happy to do this for free, however, you will be responsible for shipping and handling costs each way.

  • Ohm allows up to $4000 for the return of a complete undamaged pair of Walsh 300 MK-2's toward 25% of the purchase price of new Ohm speakers.

Contact Us

Ohm Acoustics Corp.
28 Tiffany Place, Unit 1L
Brooklyn, NY 11231 USA
Toll free: 800-783-1553
Phone: 718-422-1111
Service: 718-422-1111
Contact Us By Email

A Brand You Can Trust

Ohm Acoustics Corp. BBB Business Review

Follow us